Workplace Safety Hazards

☞Every organization must follow a standard set of safety rules and procedures.

☞These rules must be stated and displayed clearly in important areas.

☞All the employees must be given demonstrations and training to follow safety rules.

☞Fire Safety :

1. Fire escape plans must be installed at proper level.
2. Maintenance of safety equipment must be taken care of regularly.
3. Smoke alarms must be placed at proper intervals.
4. Keep the workplace a non-smoking zone.
5. Conduct regular drills.
6. Employees should be aware of all emergency exists. Eg. : fire escape routes, location of fire extinguishers and alarms.

☞Fall and Slip :

1. Workplace must be properly ventilated to receive light.
2. Oil spills, dust must be immediately cleaned.
3. Keep the moving area clean and clutter free.
4. Floors must be clean and dry.
5. Wear non-slip footwear.

☞Electrical Safety :

1. Electrical equipment used should be approved by a recognized organization.
2. Workers should be trained to handle the electric equipment safely.
3. Damaged and hazardous electrical equipment should be immediately replaced.
4. Heat emanating equipment should be kept away from the electrical equipment.
5. Take care that the outlets/circuits should not be overloaded.
6. Switch off and unplug the electrical appliances before cleaning them.

☞Use of First Aid :

1. First Aid is the immediate assistance provided to the injured to save life and minimize health loss till the proper medical aid/facility is provided.
2. Every organization must have a basic First Aid Kit. Kit must have all necessary items. Make sure to check for the expiry of medical related items.
3. Assure the injured to remain calm and not to panic.
4. Keep them warm if they are under shock.
5. Do not move the victim in case of back/neck injury.
6. Do not attempt too much- do the minimum that is essential to save life.
7. Stop any bleeding.